Basic operations
- 80 -
Loading paper in the MP tray
For the paper that can be used, please see "Applicable paper(P.72)" and "Paper applicable to each tray(P.76)".
Do not load paper of different sizes, types, and weight at the same time.
When adding paper, remove the paper in the MP tray, align edges of the paper and the paper to be added, and then
load them together.
Do not insert anything other than print paper into the MP tray.
Do not leave paper in the MP tray for an extended period of time. Dust and dirt will adhere to the paper, and the print
quality will degrade.
You can load the A5-sized paper in either portrait or landscape.
1
Place your fingers in the front recess and pull to open the MP tray towards you.
2
Hold the center of the paper supporter and pull it out towards you.
3
Open the auxiliary supporter.
4
Move the paper placement cover upward.
To Next Page
Loading...
