Troubleshooting
- 344 -
4
Remove the paper on the belt unit if any.
Doing so may cause burns.
Do not touch the fuser unit because it is hot.
Because image drums (green parts) can easily get damaged, handle with adequate care.
Do not expose the image drum to direct sunlight or strong light (About 1,500 lux or above). Do not leave it
uncovered for more than 5 minutes even under room lighting.
5
Close the output tray, and push both sides down from top.
6
Close the front cover firmly with both hands.
For the error code 382 or 385
1
Remove the jammed paper from the output exit.
To Next Page
Loading...
