Connecting to the PC after preparing the device
- 39 -
14
Press «ON LINE» to return to the standby screen.
Checking the connection from a PC
Check the IP address of this machine, and access it from a PC by using the Web browser.
1
Press the scroll button ▼ on the operator panel several times to select [Configuration], and
press «OK».
2
Press «5» on the [Configuration] screen.
3
Check that [Network Setup] is selected, and press «OK».
4
Press ▼ to select [Wired(LAN1) Information], and press «OK».
5
Press ▼ several times to select [IPv4 Address], and press «OK».
6
Take a note of the displayed IP address.
7
Start the Web browser in a PC.
8
Input "http:// (The IP address recorded in Step 6)", and press the «Enter» key.
Connection is successful when the web page of this machine is displayed.
To Next Page
Loading...
