Connecting to the PC after preparing the device
- 60 -
3
When the [DVD drive] screen is displayed, click [Launch Setup.exe].
If the [User Account Control] screen is displayed, click [Yes].
If the [DVD drive] screen is not displayed, open DVD from the Explorer.
4
Choose a language from the pull-down menu of language selection in the [Welcome] screen.
5
Read the software license agreement, and click [Accept].
6
Read the environmental advice, and click [Go].
7
Click either [Network Connection] or [USB Connection] depending on the connection method
between the PC and this machine.
If [Windows Security Alert] screen is displayed, click [Allow Access].
8
Select the model name of this machine, and click [Go].
If the printer is not displayed with a network connection, input the IP address assigned to the printer by selecting
[Search Range], and click [Search Again].
To Next Page
Loading...
