Arming with the Remote Keyless Entry
Transmitter
Your alarm system will arm when you use your remote
keyless entry transmitter
to
lock the doors,
if
the key
is not in the ignition. The security light will turn on to let
you know the system is arming. After all doors and
the liftgate are closed and locked, the security light will
begin flashing at a very slow rate
to
let you know
the system is armed.
Arming with Your Key
Your alarm system will arm when you use your key
to
lock the doors. The security light will turn on
to
let
you know the system is arming. After all doors and the
liftgate are closed and locked, the security light will
begin flashing at a very slow rate
to
let you know the
system is armed. If you would like your key not
to
arm the system, see
Vehicle Personalization on
page 2-62.
Arming Confirmation
If
remote unlock confirmation is
on,
your parking lamps
will flash briefly
to
let you know when your alarm system
has disarmed. If you would not like the parking lamps
to
flash, see
Vehicle Personalization on page 2-62.
Disarming with the Remote Keyless
Entry Transmitter
Your alarm system will disarm when you use your
remote keyless entry transmitter to unlock the doors.
The security light will stop flashing
to
let you know the
system is no longer armed.
Disarming with Your Key
Your alarm system will disarm when you use your key
to
unlock the doors. The security light will stop flashing
to
let
you know the system is no longer armed. If you would like
your key not
to
disarm the alarm system, see
Vehicle
Personalization on page 2-62.
2-28
To Next Page
Loading...
