Accessory
Inflator
Your vehicle may have an air inflator. With it, you can
inflate things like air mattresses and basketballs,
and you can also use it to bring your tires up to the
proper pressure.
The air inflator is located in the rear compartment on
the driver’s side. To remove the cover, pull the tab
on the cover and pull it
off.
This is the switch for
the air inflator.
There may be an air inflator kit stored in the glove box.
It includes a 20-foot
(6
m) hose with an air pressure
gage and nozzle adapters.
....___
ting something too much can make
it
explode, and you or others could be injured.
Be sure to read the inflator instructions, and
inflate any object only
to
its recommended
pressure.
To
use your air inflator system, do the following:
1.
Turn the ignition to ACCESSORY or RUN.
2.
Attach the appropriate nozzle adapter,
if
required,
to the end
of the hose that has the pressure gage.
3.
Attach that end of the hose to the object you wish
to inflate.
4.
Remove the protective cap covering the outlet.
5.
Attach the other end of the hose to the outlet.
6.
Press the accessory inflator switch. The light in the
switch will come on to show the system is working.
If
the air inflator system does not turn on or the
light does not come on, the fuse may be blown or
installed incorrectly. See
Fuses
and
Circuit Breakers
on
page
5-96
or see your dealer for service.
5-68
To Next Page
Loading...
