A.
Taillamp Bulb
6.
Back-up Lamp Bulb
C.
Turn Signal
Lamp Bulb
D.
StopTTailIamp Bulb
5.
Replace the bulb by pulling the old bulb out and
gently pushing the new bulb into the bulb holder
socket.
6.
Snap the bulb holder back into place, making sure all
retaining tabs are properly over the bulb holder tabs.
7. Reinstall the taillamp assembly by inserting the
outboard locatingh-etaining pins until the lamp is
seated. Secure with the inboard screws.
Replacement
Bulbs
For
any bulb not listed here contact your dealer.
I
Lamp
I
Bulb
Number
I
I
Back-ur, Lamps (3rd from Tor,)
I
31 56
I
I
Front Sidemarker Lamps
I
194
I
Front Turn SignaVParking Lamps
Headlamps
4157
NAK
9004-HBI
I
Turn Signal Lamps
(2nd from
Top)
I
3156
5-57
To Next Page
Loading...
