Securing a Child Restraint Designed
for
the LATCH System
1.
Find the anchors for the seating position you want
to use, where the bottom of the seatback meets the
back of the seat cushion.
2.
Put
the child restraint on the seat.
3.
Attach the anchor points on the child restraint
to
the
anchors in the vehicle. The child restraint instructions
will show you how.
4.
If
the child restraint is forward-facing, attach the top
strap to the top strap anchor. See
Top Strap
on
page 1-55.
Tighten the top strap according to
the child restraint instructions.
5.
Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.
Securing a Child Restraint in
a
Rear Outside Seat Position
1
I
If your child restraint
is
equipped with the LATCH
system, see
Lower Anchorages and
Top
Tethers for
Children
(LATCH
System) on page 1-58.
3
1
-60
To Next Page
Loading...
