3.
4.
5.
Count the number
of
chimes you hear.
The number of chimes indicates the vehicle's
current programmed mode. (If you do not wish to
Remote Lock and Unlock
Confirmation
change
the-current
mode, you can either exit
the programming mode by following the instructions
later in this section or program the next feature received when locking or unlocking your vehicle with
available on your vehicle.) the remote keyless entry transmitter.
This feature allows you to customize the feedback
Press UNLOCK to change the current mode.
Programmable Modes
corresponding to the mode selection you want.
Press
until
You
hear
the
number
Of
chimes
Mode
1:
Both Features
Off
(Remote lock and unlock
confirmation are disabled.)
The mode you selected
is
now set.
You
can either exit
the programming mode by following the instructions
Mode
2:
Exterior Lamps Flash Only
later
in
this section or program the next feature available
0
When you use the remote keyless entry transmitter
on your vehicle. to lock your vehicle, your parking lamps will flash to
let you know the command has been received.
When you use the remote keyless entry transmitter
to unlock your vehicle or operate your optional
power sliding door(s), your parking lamps will flash
to let you know the command has been received.
2-67
To Next Page
Loading...
