Rear
Seats
Rear Seat Operation
The rear seats in your vehicle have levers and straps
used to adjust, remove and reinstall the seats. By using
the levers and straps, in the correct order, you can
easily remove the seats from the vehicle.
When you put the seats back in the vehicle, be sure
to follow the label on the back of the seat for proper
location.
Flip and Fold Feature
The rear seats in your vehicle can be folded forward.
Use this feature for exiting and entering third row seats.
1.
If the seats have the adjustable head restraints,
push them fully down.
2.
Fold the seatback flat
on the seat, by either
pulling on the nylon
strap on the rear of the
seat or lifting up on
the lever located on the
front of the seatback.
If
the seat adjusts, slide
it all the way back.
3.
Release the rear set of
hooks from the floor
pins by pulling the
nylon strap located
at the base of the seat;
hang on to the strap as
the seat folds forward.
1
-7
To Next Page
Loading...
