To
return the seat(s) to the normal position, do the
following:
1.
Push the seat back and firmly push the rear hooks
onto the rear floor pins by pushing down on the
rear of the seat.
2.
Try to raise the seat
to
check that it is locked down.
3.
Lift the seatback recliner lever or pull the nylon
strap on the back
of the seat and raise the
seatback until it locks upright.
4.
Push and pull on the seatback to check that it
is locked.
Split
Bench
Seats
If you have the third row split bench seat, the seatbacks
can be folded forward or reclined individually and the
seats can be removed individually.
Folding
or
Rec'3ing the Seatb;
ks
If
the seatback isn't locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it
is locked.
The seatbacks on each section of the split bench seat
can be either folded forward or reclined. The following
explains how to use the nylon strap or recliner lever
to
fold or recline the seatbacks.
1
-8
To Next Page
Loading...
