Mode
3:
Exterior Lamps Flash and Horn Sounds
When you use the remote keyless entry transmitter
to lock your vehicle, the horn will sound and your
parking lamps will flash to let you know the
command has been received.
When you use the remote keyless entry transmitter
to unlock your vehicle or operate your optional
power sliding door(s), your parking lamps will flash
to let you know the command has been received.
Mode
4:
Exterior Lamps Flash and Horn Sounds
(on
second LOCK press)
When you use the remote keyless entry transmitter
to lock your vehicle, your parking lamps will flash
to let you know the command has been received.
The horn will sound and your parking lamps
will flash
if
you press the LOCK button again
within five seconds.
When you use the remote keyless entry transmitter
to unlock your vehicle or operate your optional
power sliding door(s), your parking lamps will flash
to let you know the command has been received.
Before your vehicle was shipped from the factory,
it was programmed in Mode
4.
The mode to which the
vehicle was programmed may have been changed since
it left the factory.
To
determine the mode to which
your vehicle is programmed or to program your vehicle
to a different mode, do the following:
1.
Follow the instructions for
Entering Programming
2.
Press LOCK on the remote keyless entry
3.
Count the number of chimes you hear.
Mode
on page
2-63.
transmitter.
The number
of
chimes indicates the vehicle’s
current programmed mode. (If you
do
not wish to
change the current mode, you can either exit
the programming mode by following the instructions
later in this section or program the next feature
available on your vehicle.)
4.
Press LOCK to change the current mode.
5. Press LOCK until you hear the number of chimes
corresponding to the mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
2-68
To Next Page
Loading...
