With this system, use the
LATCH
system instead
of
the
vehicle’s safety belts
to
secure
a
child restraint.
If a LAT4-type child restraint isn’t attached to
its
anchorage points, the restraint won’t be
able to protect
a child
sitting
there.
In
a
crash,
the child could be seriously injured or killed.
Make sure that a LATCH-type child restraint
is
properly installed
using
the anchorage points,
or use the vehicle’s safety belts to secure the
restraint. See “Securing a Child Restraint
Designed for the LATCH System’’ or “Securing
a Child Restraint
in
a Rear Outside Seat
Position”
in
the Index for information on how
to secure a child restraint
in
your vehicle.
1
-59
To Next Page
Loading...
