2.
Then push the tab, located on the left of the inner
access panel, to the right.
3.
The first air filter
will
pull straight out. To remove the
second, reach in and slide it toward the opening.
Pull
the second filter out.
4.
Replace the filters by reversing Step
3.
Make sure
the filters are inserted
so
that the sealing foam is
angled in the same direction on both filters. For the
type of filter
to
use, see
Normal Maintenance
Replacement Parts on page
5-
105.
5.
Close the inner access door, while squeezing the
6.
Snap the outer access panel into the back
of
the
tab. Be sure it is tightly closed.
glove box.
3-38
To Next Page
Loading...
