CD Adapter Kits 
It is possible to use  a  portable CD player adapter kit 
with your cassette tape player after disabling the 
tight/loose tape sensing feature on your tape player. 
To disable the feature, use the following steps: 
1. 
Turn the ignition on. 
2. 
Turn the radio off. 
3. 
Press  and  hold the TAPE  CD  button. The radio will 
display READY  and  flash the cassette symbol. 
4. 
Insert the adapter into the cassette slot. It will 
power  up  the radio and begin playing. 
The override feature will remain active until EJT is 
pressed. 
Playing a Compact Disc 
Insert a disc partway into the slot, label side up. 
The player will pull it 
in 
and the disc should begin 
playing. The display will show the CD symbol. If  you 
want to insert a  compact  disc with the ignition 
off, 
first 
press DlSP or  EJT. 
If 
an error appears  on  the display, see  “Compact  Disc 
Messages” later in this section. 
1 
PREV  (Previous):  Press  this pushbutton to go to the 
previous track 
if 
the current  track  has  been playing for 
less than eight seconds.  If pressed when  the  current  track 
has  been playing for more  than  eight  seconds,  it  will  go  to 
the beginning of the current  track.  TRACK  and  the  track 
number will appear  on  the display. If you hold this 
pushbutton or press 
it 
more than once,  the  player  will 
continue moving  back  through  the disc. 
2 
NEXT:  Press this pushbutton 
to 
go 
to 
the  next  track. 
TRACK.  The track number will appear  on  the  display. 
If 
you hold this pushbutton or press it more  than  once, 
the player will continue moving forward through  the  disc. 
3 
REV  (Reverse):  Press and hold this pushbutton to 
reverse quickly within a track. Press and hold this 
pushbutton for less than  two  seconds to reverse  at 
six times the normal playing speed.  Press  and  hold 
it 
for 
more than two  seconds  to reverse  at 
17 
times the 
normal playing speed. Release it to play  the  passage. 
The display will show  ET  and  the elapsed  time. 
4 
FWD 
(Forward):  Press  and  hold this pushbutton  to 
advance quickly within a track. Press and  hold  this 
pushbutton for less than two  seconds  to  advance  at 
six times the normal playing speed.  Press  and  hold it for 
more than two  seconds to advance  at 
17 
times the 
normal playing speed. Release it to play  the  passage. 
The display will show  ET  and the elapsed time. 
3-78