Checking
the
Fluid
Level
Prepare your vehicle as follows:
e
e
e
Park your vehicle on a level place. Keep the engine
running.
With the parking brake applied, place the shift lever
in PARK (P).
With your foot on the brake pedal, move the shift
lever through each gear range, pausing for about
three seconds in each range. Then, position the shift
lever in PARK (P).
Let the engine run at idle for three to five minutes.
rhen, without shutting
off the engine, follow these steps:
The dipstick is located toward the back of the engine
compartment, next to the brake master cylinder reservoir
The dipstick has a bright, red loop design for easy
identification. See
Engine Compartment Overview on
page
5-
12
ior more information on iocation.
1.
Pull out the dipstick and wipe it with a clean rag
2.
Push it back in all the way, wait three seconds and
or paper towel.
then pull
it
back out again.
5-2
1
To Next Page
Loading...
