a
P
d
Jumper
Cable
Removal
To
disconnect the jumper cables from both vehicles,
do the following:
1.
Disconnect the black negative
(-)
cable from the
2.
Disconnect the black negative
(-)
cable from the
3.
Disconnect the red positive
(+)
cable from the
4.
Disconnect the red positive
(+)
cable from the other
5.
Return the remote positive
(+)
terminal cover to its
vehicle that had the dead battery.
vehicle with the good battery.
vehicle with the good battery.
vehicle.
original position.
A.
Heavy, Unpainted Metal Engine Part
B.
Good Battery or Remote Positive
(+)
Terminal
C.
Dead Battery or Remote Positive
(+)
Terminal
5-49
To Next Page
Loading...
