Storing
the
Flat
Tire
on
an All-Wheel-Drive
Vehicle
1.
Remove the tire storage bag and cable package
from the jack storage area.
2.
If
the vehicle has aluminum wheels, remove the
small center cap by tapping the back
of
the cap
with the extension of the shaft.
3.
Put the flat tire in the tire storage bag and place
il
in the rear storage area with the valve stem
pointing toward the front of the vehicle.
A.
Cable
B.
Liftgate Hinges
C.
Door Striker
4. Pull the cable through the door striker and the
center
of the wheel.
5-84
To Next Page
Loading...
