MAESTRO SMART 25
7.12.5 External coil temperature alarm
Is the external heat
exchanger temperature greater
than 70°C(158°F)?
Are the air intake/outlet
tubes free of
obstructions?
Does the external fan
turn correctly?
Is air recirculated
through the
intake/outlet tubes, or
are the grilles not
original parts?
Does the condensate
disposal system work
correctly?
Is the external
coil clean?
Clean the Coil
Replace air tubes/grilles following
instructions in the manual
temperature is beyond the
Check for mechanical blockage
and verify board in/out voltage
External exchanger temperature
too high
Thermoactuator
Pump
Check valve
Distributor
Floats
Clear obstruction