MAESTRO SMART 35
Carefully remove the external fan (3) and disconnect the electrical unions.
9.8 Upper tank removal
Remove the body (Cf. 9.2 Body removal, on p. 32).
Remove the grille (Cf. 9.5 Grille removal, on p. 33).
Remove the screw (1) and remove the evaporating assembly (2)
sideways.
NOTE: Be careful not to force it too much and damage the tubing.
Remove the screws (3).
Slightly lift up the tank and disconnect the condensate tube (4).
Carefully remove the upper tank (5) from its seat.
To Next Page
Loading...
