Olimpia splendid MAESTRO SMART 9HP - Float Removal; External Connections; B1018 Wi-Fi Kit Overview; Wi-Fi Board Structure and Specs

44
Remove the mounting bolts at the base of the compressor (6).
Carefully remove the compressor (7).
9.24 Float removal
Remove the wiring cover (Cf. 9.16 Thermoactuator assembly removal, on
p. 38).
Unscrew the bolts (1) from the floats, being careful with the electrical
connections.
Unscrew the sensors (2) one at a time, being careful not to damage them.
10 EXTERNAL CONNECTIONS
10.1 B1018 Wi-Fi kit
10.1.1 Overview
The B1018 Wi-Fi kit allows control of the operation of the climate control
unit to which it is connected, based on commands issued by an app
installed on a smartphone, iPhone, tablet, or iPad. The Wi-Fi kit must be
installed on a climate control unit located near a wireless router.
In the event of excessive weakening of the Wi-Fi signal, the Smart App
may become disconnected more easily as the signal weakens.
In order to be able to use the Wi-Fi board, the smartphone must be able
to communicate via Bluetooth, Wi-Fi or 3G based on the location of the
same with respect to the climate control unit.
The quality of the connection to a wireless network may be affected by
the presence of electromagnetic smog.
10.1.2 Wi-Fi board structure
REF.
No.
DESCRIPTION
1
Electronic board
2
Enabling contact (if not used, leave the connector wired, as
supplied)
3
Functional LED
4
CN1 Connector
5
CN5 Connector
6
Wi-Fi radio module
7
Bluetooth module
8
Communication cable
10.1.3 Technical data
BLUETOOTH
Operating frequency range
2.4 GHz to 2.44835 GHz
Maximum transmitted power
-2.7 dBm
Communication standard
Bluetooth LE
Antenna
Integrated into the PCB
Wi-Fi
Operating frequency range
2.4 GHz to 2.44835 GHz
Maximum transmitted power
10.1 dBm
Communication standard
IEEE 802.11 b/g/n
HTTPS – Port 443
Local socket – Port 2000
Antenna
Integrated into the PCB