6
2.2 Technical properties
Energy class
Rated cooling capacity
(1)
Rated heating capacity
(3)
Rated cooling power consumption
(1)
W
Rated current draw (cooling)
(1)
Rated heating power consumption
(1)
Rated current draw (heating)
(1)
Rated energy efficiency index
(1)
Rated efficiency coefficient
(3)
Energy consumption in thermostat off mode
Energy consumption in standby mode (EN 62301)
Energy consumption for dual duct
(1)
unit, cooling function
Energy consumption for dual duct
(3)
unit, heating function
V-P-Hz
Max. power draw in cooling mode
(2)
Max. current draw in cooling mode
(2)
Max. power draw in heating mode
(4)
Max. current draw in heating mode
(4)
Dehumidification capacity
Ambient air cooling capacity (max./med./min.)
Ambient air heating capacity (max./med./min.)
External air cooling capacity (max./med./min.)
External air heating capacity (max./med./min.)
Internal/external fan speed
162/202 (6.4/8)
Maximum remote-control range (distance/angle)
Sound pressure level (5) min.-max.
Sound power level (internal only) (EN 12102)
Degree of cover protection
R410A
Max. operating pressure, intake side
Power supply cable (No. conductors x cross section mm
2
)
Test conditions
(1) External ambient temp. DB 35°C – WB 24°C (DB 95°F – WB 75°F); Internal ambient temp. DB 27°C – WB 19°C (DB 80°F – WB 66°F).
(2) External ambient temp. DB 43°C – WB 32°C (DB 109°F – WB 90°F); Internal ambient temp. DB 35°C – WB 24°C (DB 95°F – WB 75°F).
(3) External ambient temp. DB 7°C – WB 6°C (DB 44°F – WB 42°F); Internal ambient temp. DB 20°C – WB 15°C (DB 68°F – WB 59°F).
(4) External ambient temp. DB 24°C – WB 18°C (DB 75°F – WB 64°F); Internal ambient temp. DB 27°C (DB 80°F).
(5) The sound pressure level was measured in a semi-anechoic room at a distance of 2 meters from the front of the unit with the microphone at a height
of 1 meter. “Minimum” is understood to mean fan-only internal noise at lowest speed.
9,212
8,530
930
8.3
850
8.15