d-Color MF 3300/3800 2-13
2.2 Replacing consumables
2
2.2.3 Replacing a Waste Toner Bottle
If the Waste Toner Bottle becomes full, this machine stops printing, and restarts printing after the Waste
Toner Bottle is replaced.
1 Open the Front Cover.
2 Press up the Waste Toner Bottle to unlock.
3 Hold the handles at the right and left of the Waste Toner Bottle, then carefully pull out the Waste Toner
Bottle.
% Inclining the Waste Toner Bottle may cause toner to spill.
4 Take a new Waste Toner Bottle out of the package box.
% Put the used Waste Toner Bottle in the plastic bag included in the package, then store it in the
package box.
% To dispose of the used Waste Toner Bottle, use the recovery service or follow the regulations in
your region.
5 Push the Waste Toner Bottle to the back to lock it.
To Next Page
Loading...
Need help?
General
