2-8 d-Color MF 3300/3800
Replacing consumables
2
2.2
2.2.2 Replacing an Imaging Unit
The following example shows how to replace a black Imaging Unit.
NOTICE
Do not touch the surface of the OPC drum. Doing so may cause reduce printing quality.
1 Check the color of the Imaging Unit to be replaced in the message window of the Control Panel.
2 Open the Front Cover.
3 Pull the lever at the front of the Toner Cartridge to the left.
4 Hold the handle of the Toner Cartridge, then pull out it.
% Inclining the Toner Cartridge may cause toner to spill.
Y
M C K
To Next Page
Loading...
Need help?
General
