Olivetti M15 Plus - Inserting and Removing the Diskettes; Inserting a Diskette

DISKETTES, DRIVES, HARD DISK
INSERTING AND REMOVING THE
DISKETTES
Inserting a diskette
1. Open the disk drive cover (33,A) (Example: Disk drive
A, if no operating diskette or any other diskette is
available you can use the UTILITIES diskette for the
exercises below. Make sure that the diskette is write
protected).
Note that the Custo.er Test progra. is auta.atically
loaded fro. this diskette, if no operating syste. has
been loaded after the syste. has been switched ON.
2. Hold the diskette as in the illustration (34) , with
the arrow (34,A) beside the metal shutter pointing
towards the disk drive.
3. Push the diskette into the disk drive (35) . When you
encounter a slight resistance, push the diskette gently
farther in until you hear a click. The diskette should
now be lodged securely in the disk drive.
When the diskette clicks into position, the diskette
release button (36,A) is automatically pushed out and
comes
level with the side of the central unit. In this
way, the button gives you a visual indication that
there is a diskette in the disk drive.
4. Close the drive cover (36,8) .
4-5