Olivetti M15 Plus - RECOMMENDED STEPS after LOADING the OPERATING SYSTEM; Copying the National Keyboard Driver to the Operating System Diskette; System Diskette

KEYBOARD DRIVERS, UTILITIES
RECOMMENDED STEPS AfTER LOADING THE OPERATING
SYSTEM
At this point we recommend you perform the following steps
which are fully explained in your MS-DOS manual:
Copying the national keyboard driver to the operating
syste. diskette
Copy your national keyboard driver and font to the
operating system diskette if you are using a keyboard other
than the US ASCII keyboard (example: if you want to copy
the Italian keyboard driver from this diskette you have to
copy the file named: keybit.com) .
Creating an AUTOEX[C.BAT file
Create an autoexec.bat file on your operating system
diskette, if you wish certain commands to be executed
automatically after loading your operating system diskette.
Commands in the autoexec.bat file on your operating system
diskette are automatically executed when the operating
system is loaded. for example an autoexec.bat file can be
used
to automatically load your national keyboard driver
version.
Creating a CONfIG.SYS file on your operating syste.
diskette
If needed, create a configs.sys file on your operating
system diskette. The config.sys file is needed for example
when special drivers are to be loaded.
5-3