Olivetti M15 Plus - Switching Back to the Us-Ascii Keyboard; THE SWISS-GERMAN;SWISS-French KEYBOARD; The Greek Keyboard

SWITCHING BACK TO THE US-ASCII
KEYBOARD
After loading a national keyboard driver, you can return to
the US-ASCII keyboard by pressing the key combination CTRL
+ ALT + Fl .
You can then select your national keyboard version using
the key combination CTRL + ALT + F2 .
THE SWISS-GERMAN/SWISS-fRENCH
KEYBOARD
There is only one Swiss keyboard version, which serves for
both the Swiss-French and Swiss-German character sets. If
you have this keyboard, you must load the correct keyboard
driver. The keyboard driver affects three keys, which are
shown in the illustration (39,8).
THE GREEK KEYBOARD
Both Greek and Latin characters can be entered on this
keyboard. When delivered, the keyboard is configured for
the Latin alphabet. In order to change to the Greek
alphabet, simply press the ALT and ENTER keys, at the same
time. To return to the Latin alphabet, use the same
procedure.
Only the alphabetic area of the keyboard is affected by
this procedure. The other keys retain the same functions
for both, with the exception shown in (39,C).
6-10 H15 PLUS INSTALLATION AND OPERATIONS GUIDE