Olivetti M15 Plus - HARDWARE RESET - SWITCHING Orf;On

HARDWARE RESET - SWITCHING orr/ON
A Hardware Reset (which is to be distinguished from a
Software Reset as explained in the Chapter 6: Working with
the keyboard) is performed by switching orr the system and
ON again. Situations in which a Hardware Reset is to be
performed:
The keyboard is blocked and does not accept any input.
The hard disk is switched ON after the system has been
switched ON. A Hardware Reset has to be performed
before the system can recognize and use the hard disk
when working on batteries.
Use this system feature with care since all data in the
memory will be lost.
3-10
M15 PLUS INSTALLATION AND OPERATIONS GUIDE