Olivetti M15 Plus - Page 78

POSSIBLE SOLUTION:
Change to AC. Charge the batteries.
3. PROBLEM:
You are working on batteries: relatively new batteries
seem not to be sufficiently charged up after a full
charging cycle of fifteen hours).
The "battery low" indicator light (40,8) on the system
lights up when you return to battery operation.
POSSIBLE CAUSE :
Batteries fully discharged. You might have
forgotten to switch the system off.
POSSI8LE SOLUTION:
In this case try a second charging cycle. If the
second charge cycle is not successful, consult
your dealer. The battery may need to be replaced.
4. PR08LEM:
8-2
Systems with HARD DISK, operating on batteries:
After switching ON the system, the hard disk is not
recognized by the system (an appropriate error messsage
will appear on the screen).
POSSIBLE CAUSE:
You forgot to switch the hard disk on, before you
switched the system on.
POSSIBLE SOLUTION:
Save your current work session (use the disk drive
A: to store your data).
M15 PLUS INSTALLATION AND OPERATIONS GUIDE