2
Point the camera at a sheet of white
paper.
● Position the paper so that it fills the screen
entirely. Be sure there is no shadow or
background showing around the paper.
3
Press to store the new white
balance setting.
● To cancel ONE TOUCH WB, press
É.
4
Press repeatedly until the menu disappears.
110
White Balance (Cont.)
Chapter 6
Control panel
White balance
This does not appear during the
AUTO setting.
● Set AUTO for the normal shooting.
● When setting the white balance by pointing the camera at white paper, the
setting may be incorrect if the light reflected by the paper is too bright or
dark.
● White balance may not be effective under some special light sources.
● After setting the white balance, playback the image and check the color on
the monitor.
To Next Page
Loading...
