EasyManua.ls Logo

Olympus CAMEDIA C-4040 Zoom - Formatting Cards

Olympus CAMEDIA C-4040 Zoom
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
132
Chapter 7
Formatting Cards
Cards must be formatted. Formatting prepares cards to receive data.
Olympus CAMEDIA-brand cards are highly recommended. If you are going to
use non-OLYMPUS cards or cards formatted by other devices such as a
computer, you must format them with the camera before use. Cards can be
formatted in all mode dial positions.
1
In the top menu, select MODE MENU T CARD T CARD SETUP T
FORMAT.
2
Press .
The FORMAT screen is displayed.
3
Press Ñ to select YES.
4
Press to start formatting.
A bar is displayed to show the progress of
formatting.
To cancel formatting, select NO in step 3
and press .
FORMAT screen
FORMAT
YES
NO
Screen during formatting
All existing data stored on the card is erased when the card is formatted.
Make sure that you save or transfer important data before formatting a used
card.
Recording time may be longer with non-OLYMPUS cards and computer-
formatted cards. In such cases, re-formatting with the camera is
recommended.
Cards with a write-protect seal cannot be formatted.

Table of Contents

Other manuals for Olympus CAMEDIA C-4040 Zoom

Related product manuals