EasyManua.ls Logo

Olympus CAMEDIA C-4040 Zoom - Monitor indications - Shooting information; Shooting mode; Aperture value; Shutter speed

Olympus CAMEDIA C-4040 Zoom
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Monitor indications
— Shooting information
The indications vary depending on the shooting mode.
The information below is displayed
for about 3 seconds after operating
the buttons/mode dial or closing the
menus.
The information below is always
displayed in the shooting mode.
* The illustrations show examples of
indications displayed when the mode
dial is set to P.
1 Shooting mode (P. 59, 60)
Displays the shooting mode.
P: Program mode, A: Aperture priority mode, S: Shutter priority mode,
M: Manual mode, : Movie mode
2 Aperture value (P. 61)
Displays the current aperture value.
3 Shutter speed (P. 62)
Displays the current shutter speed.
4 Exposure compensation (P. 108)
Displays the current exposure (brightness) compensation value.
Exposure differential (M mode only) (P. 63)
Displays the difference between the exposure determined by the
currently selected aperture and shutter speed compared to the
exposure level considered optimal by the camera.
5 AF target mark (P. 74)
Place this on the subject.
AEL
SLOW1
2272x1704
AEL
Name of parts

Table of Contents

Other manuals for Olympus CAMEDIA C-4040 Zoom

Related product manuals