92
Chapter 5
Metering modes — Metering the
subject brightness (Cont.)
Meters the brightness of the subject at up to 8 different points to set the
optimal exposure based on the average brightness. Useful with high-contrast
subjects.
Multi-metering — Metering the exposure of more than
one point in the frame
1
(In the A/S/M mode)
In the top menu, select MODE MENU T CAMERA T A/S/M T A or S.
2
Press to engage the spot metering mode (P. 91).
3
In the top menu, select MODE MENU T CAMERA T MULTI
METERING T ON.
4
Point the AF target mark where you want to meter the exposure. The
subject’s brightness can be metered at up to 8 different points.
● A metering bar appears on the monitor.
● Brightness meter readings are ignored
after the 9th reading.
● To cancel the locked multi-metering
exposure, hold down over 1
second to display MEMO . Press it again
and release it quickly.
5
Take a picture.
To Next Page
Loading...
