17
Monitor indications
— Shooting information (Cont.)
0 Drive mode (P. 88)
● Displayed when the drive mode is set on the menus.
: Single-frame shooting, : Sequential shooting, : AF
Sequential shooting, : Self-timer/remote control shooting, BKT :
Auto-bracket
! White balance (P. 110)
● Displayed when WB is set on the menus.
No indication: AUTO, : Daylight, : Overcast, : Tungsten light,
: Fluorescent, : One touch white balance
@ ISO (P. 107)
● Displays the ISO (AUTO, 100, 200 or 400) selected on the menus.
When set to AUTO, the ISO changes to 100 when the Mode dial is set
to A/S/M. When AUTO is selected, the ISO is automatically increased in
low-light situations when the flash is not used. This is to prevent blurring
from camera movement.
# Record mode (P. 103) TIFF/SHQ/HQ/SQ1/SQ2
● Displays the record mode selected on the menus.
$ Number of pixels (P. 104)
● Displays the number of pixels.
To Next Page
Loading...
