177
External flash (Cont.)
Chapter 11
3
To use the external flash only
T Select , then press .
To use the external flash together with the main flash
T Select IN+ , then press .
4
Turn on the external flash.
● The mode for the external flash is TTL-AUTO.
● When the shutter button is pressed halfway, the external flash begins
communicating with the camera and automatically switches to TTL-
AUTO.
5
Press the (flash mode) button to
select the camera’s flash mode (P. 84).
Flash mode button
● If close-up pictures are overexposed, try using the main flash by itself.
● When the main flash and the FL-40 are used together, the main flash is
used as the compensating light source. This means that if the amount of
light from the FL-40 is insufficient (beyond its working range), the resulting
pictures may be underexposed.
To Next Page
Loading...
