1
In the top menu, select MODE MENU
T PICTURE T , then press í.
● When is displayed on the top menu,
press
Ñ, É or ñ according to the arrow
shown next to . This allows you to set
directly instead of via MODE MENU.
2
Press Ññ to select the desired record
mode (refer to the table on the
previous page), then press
í.
3
Press Ññ to select the resolution
(refer to the table on the previous
page).
● When you have selected SQ1/SQ2: After
selecting the resolution, press
í. Press
Ññ to HIGH or NORMAL.
4
Press to save the setting.
Factory default setting: HQ
In the top menu, select T HQ or SQ,
then press .
Factory default setting: HQ
Arrow pad
button
Selecting a recording mode for still pictures
Selecting a recording mode for movies
To Next Page
Loading...
