1
Press / repeatedly until
appears.
2
Point the remote control at the remote
control receiver on the camera and press
the shutter button on the remote control.
● The camera’s self-timer/remote control
lamp blinks for about 2 seconds before
taking the picture.
Factory default setting: OFF
Shooting is possible using the remote control (optional). This is useful when
you want to take a picture with yourself in it. If you want to release the shutter
without touching the camera (when shooting pictures in the evening or at
night, etc.), you can use the remote control instead of the camera’s shutter
button to avoid camera movement. Use a tripod to stabilize the camera.
Transmitted remote
control signal
effective area
Remote control receiver
Shutter button
T buttonW button
Self-timer/Remote control lamp
Lens side
/ (Self-timer/Remote control)
button
To Next Page
Loading...
