1
In the top menu, select MODE MENU
T PICTURE T . Press
í.
● The white balance adjustment indicator
appears on the screen.
2
The color becomes bluer each time
you press
Ñ, and redder each time
you press
ñ, depending on the
original white balance conditions.
Press to save your adjustment.
● White balance can be adjusted between
+7 and –7.
Factory default setting: ±0
● Set white balance to AUTO for normal shooting.
● When setting the white balance by pointing the camera at white paper, the
setting may be incorrect if the light reflected by the paper is too bright or
dark.
● White balance may not be effective under some special light sources.
● After setting the white balance, playback the image and check the color on
the monitor.
To Next Page
Loading...
