85
Chapter 5
Chapter 5
Advanced shooting
Metering modes — Metering the
subject brightness
There are 3 metering methods: Digital ESP metering, spot metering and
multi-metering.
Digital ESP metering: Meters the center of the subject and the area around it.
Spot metering: Meters the brightness of the center area of the viewfinder.
Multi-metering: See P. 86.
1
Press repeatedly until (spot
metering) or (spot metering+macro
mode) appears.
● The monitor turns on automatically.
● The indications change as follows (if all
modes are available):
● If is not pressed within 2 seconds
after the selection screen is displayed,
the selection screen disappears.
2
Press the shutter button to take a
picture.
Factory default setting: Digital ESP
OFF
(Digital ESP)
(P. 92)
When selecting
Spot metering
(macro/spot) button
Exposure is determined by metering within the AF target mark. In this mode,
a subject can be shot with optimal exposure regardless of the background
light. In the working range of the macro mode, spot metering is also available
(spot metering+macro mode).
Spot metering — Selecting the metering area
Shutter button
To Next Page
Loading...
