69
Chapter 4
1
Hold down for more than 1 second.
When the focus distance selection
screen appears on the monitor, press
í to select MF.
2
Press Ññ to select the focus
distance.
● During operation, you can enlarge the
area you are focusing on. The lengths
shown are for reference only. When the
length indicator is moved to less than 2
m (6.6 ft), the bar display automatically
switches to the 10 cm (4 inches)–2 m
(6.6 ft) bar display.
3
Hold down for more than 1 second
to save the setting.
● MF appears in red.
4
Press the shutter button to take a
picture.
● Focus is locked at the distance you have set.
5
To cancel the saved MF setting, hold down again for more than 1
second to display the focus distance selection screen.
Focusing (Cont.)
To Next Page
Loading...
