172
Chapter 8
Rec View
You can choose if the image being recorded is displayed on the monitor
during shooting.
ON
The image being recorded is displayed. This is useful for a brief check of
images you have just taken. Pressing the shutter button halfway at any time
displays the image the camera is currently aimed at.
OFF
The image being recorded is not displayed. This is useful when you want to
prepare your next shot while the previous image is being recorded.
In the top menu, select MODE MENU T
SETUP T REC VIEW T ON or OFF. Press
. Press again to cancel the menu .
Factory default setting: ON
To Next Page
Loading...
