175
Chapter 8
Power on/off display setting
You can select a picture and/or sound to display/output when the power is
turned on/off. It is also possible to register your favorite picture for display
when the power is turned on/off (P. 177). To select the already registered
picture, select “2” in SCREEN. The sound volume is the same level as
selected in the VOLUME setting (P. 146).
1
In the top menu, select MODE MENU
T SETUP T PW ON/OFF SETUP.
Press
í.
● The PW ON/OFF SETUP screen appears.
2
Press Ññ to select SCREEN or
SOUND, then press
í.
3
Press Ññ to select OFF, “1” or “2”,
then press .
● The SCREEN SETUP screen appears
and asks if you are sure you want to
register a picture.
To Next Page
Loading...
