Olympus CAMEDIA C-730 Ultra Zoom - Trimming Setting

191
Chapter 9
Trimming setting
1
Do steps 1 – 5 of
“Single-frame
print reserve”. In
step 5, select
(P. 188).
It is possible to enlarge a part of a recorded picture and to print out the
enlarged section only.
If has been set already, the screen
appears. Select RESET and press .
● If you select OK or CANCEL, then press ,
the screen returns to the screen, which is
displayed in step 5 on P. 189.
OK :Saves the current trimming size.
RESET :Sets a new trimming size.
(Go to Step 2).
CANCEL:Cancels the trimming size.
CANCEL
RESET
O K
2
Use the Arrow pad and the Zoom lever to determine the position and
extent of trimming.
Move upward
Move to the right
Move downward
Move to the left
Mode dial
setting
Change size
(Go to Step 2)