169
Chapter 8
Beep sound adjustment
You can set the volume of the beep used for button operations or warnings to
OFF, LOW or HIGH. The factory default setting is 1/HIGH, but you can turn
the beep completely off if you do not want it.
1
In the top menu, select MODE MENU
T SETUP T , then press
í.
2
Press Ññ to select the desired
setting.
OFF: Tu r ns the sound off
T Go to step 4.
1 or 2: Selects the tone
To complete the setting
T Go to step 4.
To adjust the volume
T Go to step 3.
3
Press í, then press Ññ to select
HIGH or LOW.
4
Press . Press again to cancel the
menu.
Factory default setting: 1/HIGH
Arrow pad
button
To Next Page
Loading...
