Olympus CAMEDIA C-730 Ultra Zoom - AF AREA - Changing the Position of the AF Target Mark

68
Chapter 4
Focusing (Cont.)
SELECT
GO
AF AREA
1
In the top menu, select MODE MENU
T CAMERA T AF AREA. Press
í.
● AF target mark position select screen
appears.
2
Press the arrow pad to move the AF
target mark to the area you want to
focus on.
● You can move the AF target mark
vertically and horizontally from the
center of the screen.
3
Press the shutter button to take a
picture.
● To restore the AF target mark to the
default position, press . The AF
target mark is placed at the screen’s
center.
● Press again to cancel the AF target
mark selection.
Allows you to select the area you want to focus on by changing the position of
the AF target mark. Set AF mode to SPOT in advance (P. 66).
Mode dial
setting
AF AREA — Changing the position of the AF target
mark
Arrow pad
button
Shutter button
● AF AREA is not available when the DIGITAL ZOOM is set to ON.
● The camera cannot save the AF target mark selection.
Note
AF target mark