153
Chapter 7
Playback on a TV (Cont.)
3
Set the mode dial to . Turn on the camer and the TV. Set the TV to
the video input mode.
● For details on switching to video input, refer to your TV's instruction
manual.
4
Select an image by using the arrow pad.
● The selected image will be displayed on the TV.
● The optional AC adapter is recommended when using the camera
with a TV.
● Images can also be rotated when they are played back on a TV. See
the next page for details.
TIPS
● Make sure that the camera’s video output signal type is the same as the
TV’s video signal type (P.182).
● The camera’s monitor turns off automatically when the camera is connected
to a TV.
● The image may appear off-center on the TV screen. This is due to the TV’s
adjustment settings.
● When images are compressed in order to fit the entire image on a TV
screen, a black frame is placed in the blank parts of the screen around the
image. If the image is output to a video printer via the TV, the black frame
may be printed.
To Next Page
Loading...
