82
Chapter 4
Flash shooting (Cont.)
● If the (flash mode) button is not
pressed within 2 seconds after the
selection screen is displayed, the
selection screen disappears.
● To de-activate the flash (Flash Off mode
), push the flash back into the
camera.
3
Press the shutter button halfway.
● When the flash is ready to fire, the
mark lights (flash stand-by).
4
Press the shutter button all the way.
● The flash fires.
Flash working range
W (max.) : Approx. 0.1 m – 5.5 m (0.3 ft – 18 ft)
T (max.) : Approx. 1.0 m – 4.4 m (3.3 ft – 14 ft)
:Available, – : Not available, : Factory default setting
* The factory default setting and the available settings differ depending on which shooting
mode is selected.
Mode
Drive mode
Auto-flash
SLOW1
SLOW2
SLOW
*
A/S/M
P
ASM
–
–
–
–
–
–
–
–
To Next Page
Loading...
