Setting time and date
Ifyousetthetimeanddatebeforehand,the
informationwhenthefileisrecordedisautomatically
storedforeachfile.Settingthetimeanddate
beforehandenableseasierfilemanagement.
Whenyouusetherecorderforthefirsttime
afterpurchasingit,orwhenthebatteries
havebeeninsertedwithoutthedevice
beingusedforalongtime,thetime/date
settingscreenwillappear.
However,whenaPasswordhasbeenset
asthedevicelockfunction(☞P.31),the
recorderwillgotothetimeanddateset
screenafterverification(unlocking).
1 Pressthe9 or 0buttontoselect
theitemtoset.
Setting time and date [Time & Date]
OK/MENUbutton
+,−button
9,0button
F1,F2,F3button
Selecttheitemfromthe
“hour”,“minute”,“year”,
“month”and“day”witha
flashingpoint.
2 Pressthe+ or −buttontoset.
Youcanselectbetween12and
24hourdisplaybypressing
theF2(24H)buttonwhile
settingthehourandminute.
• Youcanselecttheorderofthe“Month”,“Day”
and“Year”bypressingtheF2(D/M/Y)button
whilesettingthem.
3 PresstheOK/MENUbuttontocomplete
thesetting.
• Theclockwillstartfromthesetdateandtime.
PresstheOK/MENUbuttonaccordingtothe
timesignal.
Notes
• Movingtheslideswitchtoapositionotherthan
STOP(4)whilesettingthetimeanddatewill
cancelthetimeanddatesetting.Therecorderwill
returntotheprevioustimeanddate.
• YoucansetthetimeanddatefromyourPCusing
ODMSandDSSPlayersoftware(☞P.4 4).