Olympus DS-5500 - Insert recording

25
EN
2
Hands-free recording / Recording monitor
Therecordercanbeusedasahands-freerecording
device.Tosetuptherecorderforhands-free
operation,connecttheoptionalOlympusFoot
Switchtothebackofthedockingstationandplace
therecorderinthedockingstationasshowninthe
illustrationbelow.
YoucansettheHands-freefunctionoftherecorder
to[Dictation](default)or[Transcription]byusing
thecustomizefunctionsoftheODMSsoftware
(☞P.44).UsingtheODMSsoftwareyoucanalso
changethefunctionsofthefootpedals.
Formoredetails,refertotheonlinehelpforODMS
software(☞P.47).
Itispossibletomonitoryourrecordingbylistening
toitevenwhiletherecordingisinprogress.Inorder
todoso,inserttheearphoneplugintotheearphone
jackandusethe+or–buttonstocontrolthevolume
level.
Notes
• Whenconnectinganearphoneoranexternal
microphone’splug,inserttheplugallthewayin
asshownintheillustrationabove.
• Toavoidirritationtotheear,inserttheearphone
afterturningdownthevolumelevel.
• Donotplaceearphonesnearamicrophoneasthis
maycausefeedback.
+,−(Volume)button
Hands-free recording Recording monitor
Notes
• MovetheslideswitchtotheSTOP(4 )position
beforeconnectingittothedockingstationfor
hands-freerecording.
• Torecordwithbetterqualityusingthehands-free
recordingfunction,setthemicrophonesensitivity
to[Conference]mode(☞P. 37),oruseanexternal
microphone.