Olympus DS-5500 - Connecting to your PC; Connecting to your PC using the USB cable

51
4
EN
Connecting to your PC
Connecting to your PC
Connecting to your PC using the docking station
Place the recorder in the docking station
1 ConnecttheUSBcabletotheUSBportofthePC.
2 ConnecttheUSBcabletothedockingstationasshowninthe
illustration.
3 Settherecorderinthedockingstation.
• [Remote(Composite)]isdisplayedontherecorderiftheUSBcableis
connected.
• IftheACadapterisconnectedaswell,powerwillbesuppliedfromthe
ACadapter.
Disconnecting from your PC
Windows
1 Click[ ]onthetaskbarlocatedatthelower-rightcornerof
thescreen.Click[Safely remove USB Mass Storage Device].
• ThedriveletterwilldifferdependingonthePCbeingused.
2 Confirmthatthestatusindicatorlightturnsoffbefore
disconnectingtheUSBcable.
Macintosh
1 Draganddroptherecorder’sdriveiconforthisrecorder
displayedonthedesktoptotheRecycleBinicon.
2 Confirmthatthestatusindicatorlightturnsoffbefore
disconnectingtheUSBcable.
Notes
• NEVERremovethecardordisconnecttheUSBcablewhilethestatus
indicatorlightisflashing.Ifyoudo,thedatawillbedestroyed.
• Nevertouchthecontactpointsatthebottomofthedockingstation,asthis
maycauseabadconnection.
• WithaPCconnected,therecordercannotbeoperatedwiththeFoot
Switch.WhenconnectingtherecordertoaPCviathedockingstation,
removetheFootSwitch.